Boat Propeller Wrenches
-
Acme Propellers® - Propeller Puller EnginePropeller Puller Engine by Acme Propellers®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Acme Propellers will last...Expertly crafted from premium materialsDesigned to match rigorous quality standards$179.00 - $213.04In Stock - Ships in 24 to 48 hrs - Attwood® - Plastic Propeller Wrench Kit (11370-7)Plastic Propeller Wrench Kit by Attwood®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great...Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple propsBuilt of durable plastic$17.56In Stock - Ships within 24 hrs
- Acme Propellers® - Propeller Puller Kit with C-Clamp Puller for 1"- 1-1/8" Shafts (4999)Propeller Puller Kit with C-Clamp Puller for 1"- 1-1/8" Shafts by Acme Propellers®. Weekend Saver Kit. The Acme Weekend Saver Kit includes: traditional C-clamp style puller, cotter pin, Nylock nut, key, adjustable wrench, pliers, heavy...Expertly crafted from premium materialsDesigned to match rigorous quality standards$323.09In Stock - Ships in 24 to 48 hrs
- Acme Propellers® - Propeller Puller for 1"- 1-1/8" Shafts (228S)Propeller Puller for 1"- 1-1/8" Shafts (228S) by Acme Propellers®. C-Clamp Prop Puller Only. The Acme Weekend Saver Kit includes C-Clamp puller, bolt, and cap. Available for a variety of shaft sizes from 1" to 1-1/4".Expertly crafted from premium materialsDesigned to match rigorous quality standards$179.00In Stock - Ships in 24 to 48 hrs
- Acme Propellers® - Propeller Puller for 1-1/4" Shafts (330S)Propeller Puller for 1-1/4" Shafts (330S) by Acme Propellers®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs...Expertly crafted from premium materialsDesigned to match rigorous quality standards$213.04In Stock - Ships in 24 to 48 hrs
- Sea Dog® - Zinc Plated Steel Propeller Wrench (531112)Zinc Plated Steel Propeller Wrench by Sea Dog®. This zinc plated steel Prop Wrench fits all standard 1-1/16" prop nuts. Compact size for just the right leverage. This multi-tool fits garboard drain plugs with 9/16" square heads and...Expertly crafted from premium materialsDesigned to match rigorous quality standards$10.42In Stock - Ships in 24 to 48 hrs
- T-H Marine® - Prop Master™ Yellow Plastic Propeller Wrench (PMW-1-DP)Prop Master™ Yellow Plastic Propeller Wrench by T-H Marine®. This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other...Fits All 1-1/16" Prop Nuts (40hp and up)Rugged Nylon Resists Stripping$19.34In Stock - Ships within 24 hrs
A boat propeller is a crucial part that pushes the vessel forward and withstands rather high loads. Besides, it's quite expensive, and if you're going to remove this part or install it back, this job has to be done properly, without the risk of damaging the propeller, driveshaft, or other parts. It's a common situation when the prop gets stuck in place even after the nut has been removed, and in order to take it off safely, the modern market and our online store in particular offer a wide range of boat propeller wrenches and pullers.
Designed by experienced engineers and mechanics, these tools allow you to do everything right. Our wrenches may vary in their designs, but each of them is well-suited to certain configurations and thread sizes. As for pullers, they are suitable for the corresponding diameters of shafts. Most of them are put on the shaft with the puller's end behind the prop, and it gets loose when you're tightening a thread on the puller using a wrench. Another kind of pullers is also known as propeller knockers or harmonic pullers. Essentially, such a tool is a tough metal bit screwed on the shaft for knocking with a hammer. The prop comes off thanks to minor vibrations created by one or several accurate strikes.
